Laboratory chemical waste management is an essential factor to be addressed in parallel to a research study. This publication described the use of a simple technique, the galvonostitic mehtod, to manage the CdTe electrolyte waste generated in CdS/CdTe solar cell fabrication by extracting the heavy metal cadmium from the waste. About 98% of the cadmium in the waste solution can be successfully removed using the galvanostatic process under a low current. The materials extracted can be use as precursors for CdTe deposition by close spaced sublimation or thermal evaporation after optimization.
|
||
G.K.U.P. Gajanayake, D.S.M. De Silva & H.Y.R. Atapattu Journal of Materials Science: Materials in Electronics |
||
Abstract:- https://doi.org/10.1007/s10854-023-10428-4
|